Rigol DM3058 Specifikace stáhnout pdf (Strana 209)

RIGOL

Programming Guide for DM3058

5-93

Explanations:

SYSTem:COMMunicate:LAN:DDNS□{ON|OFF}: Turn dynamic DNS(DDNS) on or

off.

SYSTem:COMMunicate:LAN:DDNS?: Query the switch state of dynamic DNS.

If the setting of DDNS is changed, the new configuration will be effective when

power is on.

Return Format:

The query returns the switch state of DDNS.

6. SYSTem:COMMunicate:LAN:DHCP

Command Format:

SYSTem:COMMunicate:LAN:DHCP□{ON|OFF}

SYSTem:COMMunicate:LAN:DHCP?

Function:

The command sets or queries the enable state of DHCP (Dynamic Host

Configuration Protocol).

Explanations:

SYSTem:COMMunicate:LAN:DHCP□{ON|OFF}: Enable or disable DHCP.

SYSTem:COMMunicate:LAN:DHCP?: Query the enable state of DHCP.

If DHCP is ON, the multimeter will try to obtain an IP address from DHCP. If a

DHCP is found, it will assign a dynamic IP address, Subnet Mask, and Default

Gateway to the instrument.

When DHCP is OFF, the multimeter will use the static IP address, Subnet Mask,

and Default Gateway during power-on.

Return Format:

The query returns the enable state of DHCP.

7. SYSTem:COMMunicate:LAN:DNS

Command Format:

SYSTem:COMMunicate:LAN:DNS□"<address>"

SYSTem:COMMunicate:LAN:DNS?□[{CURRent|STATic}]

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 263 264

Žádné komentáře

Rigol DM3058 Specifikace Strana 209