Rigol DM3064 Specifikace stáhnout pdf (Strana 21)

Chapter 2 Command System RIGOL

Programming Guide for DM3000

2-9

The query returns 0, 1, 2, 3 or 4.

Explanation

The DCV function must be specified at least one time before using

this command.

6. :MEASure:VOLTage:DC:IMPEdance

Syntax

:MEASure:VOLTage:DC:IMPEdance?

:MEASure:VOLTage:DC:IMPEdance {10M|10G}

Function

Sets the DC impedance to 10MΩ or >10GΩ.

The query returns 10M or 10G.

Explanation

“>10G” is available only in ranges of 200mV, 2V, 20V of the DC

voltage.

7. :MEASure:VOLTage:DC:DIGIt

Syntax

:MEASure:VOLTage:DC:DIGIt?

:MEASure:VOLTage:DC:DIGIt {INC|DEC|5|6|7}

Function

Sets the display digit for DC voltage measurement values.

The query returns 5, 6 or 7.

Explanation

 DEC and INC settings are invalid when the display digits are 5

and 7, respectively.

 Each parameter has its own meaning:

Parameter

Explanation

INC

increase the digit

DEC

decrease the digit

the digit is 5

the digit is 6

the digit is 7

Example

Setting the display digit to 7:

:MEASure:VOLTage:DC:DIGIt 7

Decreasing the display digit by one bit:

:MEASure:VOLTage:DC:DIGIt DEC

8. :MEASure:VOLTage:DC:RATIo?

Syntax

:MEASure:VOLTage:DC:RATIo?

Function

The query returns the ratio of DC voltages in two circuits in the

form of scientific notation such as +1.74214858E-01.

Explanation

The instrument should input two DC voltages at the same time.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 86 87

Komentáře k této Příručce

Žádné komentáře

Rigol DM3064 Specifikace Strana 21

Komentáře k této Příručce

Související produkty a manuály pro Multimetry Rigol DM3064