Rigol DM3062 Specifikace stáhnout pdf (Strana 24)

RIGOL

Service Guide for DM3000 Series

1-10

Max. Input: The DC + AC current peak value <300% of the range. The RMS

current including DC current <10A.

Shunt Resistor: 0.025Ω for 1A, 10A,

1.025Ω for 200mA,

11.025Ω for 20mA

Input Protection: Externally accessible 10A, 250V fuse

Internal 12A, 250V fuse

Frequency and Period

Measurement Method: Reciprocal-counting technique. AC-coupled input using the ac

voltage measurement function.

Input Impedance (Voltage Signal):1MΩ ± 2%, in parallel with <100pF

Shunt Resistor (Current Signal): 0.025Ω for 1A, 10A,

1.025Ω for 200mA,

11.025Ω for 20mA

Input Protection: 750VRMS all ranges;

Externally accessible 10A, 250V fuse

Internal 12A, 250V fuse

Capacitance

Measurement Method: Current input with measurement of resulting ramp.

Connection Type: 2-wire

Triggering and Memory

Samples per Trigger: 1 to 2,000,000

Trigger Delay: 0 to 3600 sec

Input Level: TTL compatible (High level when left trigger input open)

Trigger Condition: Selectable Rising, Falling, Low-level, High-level.

Input Impendence: >20kΩ, in parallel with 400pF, AC-coupled

Delay: <1μs

Min Pulsewidth: 1μs

VMC Output:

Level: TTL compatible (Input to ≥ 1kΩ load)

Output Polarity: Selectable Positive, Negative

Output Impendence: 200Ω, typical

Nonvolatile Memory: 512K readings

Volatile Memory: 2M readings

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 101 102

Žádné komentáře

Rigol DM3062 Specifikace Strana 24