Rigol DM3068 Uživatelská příručka stáhnout pdf (Strana 104)

RIGOL Chapter 2 Front Panel Operations

User’s Guide for DM3068

2-62

Reading Hold

The multimeter captures stable reading and holds it on the screen when the

reading hold function is enabled.

The sensitivity range determines whether the reading is stable enough and can be

displayed on the screen. This parameter is expressed in the form of reading

percentage based on the current range. The multimeter will not capture and

display new reading until three continuous readings exceed the selected sensitivity

range.

Press  Hold  On/Off to enter the following interface.

Press On/Off to enable or disable the reading hold function. When it is enabled, the

backlight of

at the front panel starts flashing. The settable sensitivity ranges

are 0.01%, 0.1%, 1% and 10% and the default is 0.1%.

For example, if you choose 0.1%, the input signal into the multimeter is 5 V and

the new reading will be displayed if three continuous readings exceed the range

from 4.9975 V to 5.0025 V.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 170 171

Žádné komentáře

Rigol DM3068 Uživatelská příručka Strana 104